Powder Coating Fort Lauderdale

In Fort Lauderdale, powder coatings as well as ceramic coatings are becoming a popular choice especially when it comes to cars.

But before you opt for either of these, it is important to know the difference between the two, how to maintain powder coating in Fort Lauderdale, the cost of powder coating and ceramic coating and its different types.

Comparison between Powder Coating and Ceramic Coating

Often times powder coating and ceramic coatings are confused to be the same thing. In simple words, powder coating in Fort Lauderdale is applied on substrates that provide surfaces that are harder than paint. It is also available in various colors. In contrast, ceramic coatings are much more resistant to chipping, extreme heat and corrosion. Ceramic coating is available in only a few sheens and colors and it is much more durable than powder coatings in Fort Lauderdale.

Powder coatings in Fort Lauderdale are applied to work pieces and parts after they are cleaned and removed of grease and scum. The paint is then applied electrostatically and the entire item is cured in an oven for 2 to 4 hours. If you are looking for a coating that can withstand a high amount of heat and is resistant to chipping and corrosion, then ceramic coating should be your choice.

Cost-effective Powder Coating Fort Lauderdale

Automobile Ceramic Powder Coating Fort Lauderdale

How is Ceramic Coating Applied?

As opposed to the application of powder coating in Fort Lauderdale, ceramic coatings are usually applied in two ways that is dip-spin and the traditional wet-spray process.

Dip –spin- This method is mostly used for large batches of small to medium sized parts. First the parts are surface-prepped. Then it is placed in a large bin that has perforations in it. This bin is then placed into another container that contains the ceramic coating. Once it is fully immersed, it is lifted out of the container and spun so that all the excess coating drips off. This method is cost-effective and helps to save on energy and resources as a large number of items are coated in a single time. The parts are then left to cure in a large oven.

Wet-spray process- The wet-spray process is the traditional way of applying ceramic coatings and it is mainly used for large components like mufflers, headers and exhaust tubing. But it can also be used for water pump housing, oil pans, hood hinges, brackets and braces and other things. A pre-requisite for applying ceramic coating in the wet-spray process is that the item needs to be able to withstand a temperature of at least 750 degrees Fahrenheit for a period of 3 to 5 hours. After the surface is prepared it is coated and then placed in a large oven for curing.

Call (954) 231-1287

Cost of Powder Coating

The cost of powder coating in Fort Lauderdale depends on several aspects. For instance it could depend on the type and color of the powder being used, the method of application, how much pre-treatment is required and the surface area of the object. On an average you can expect to pay between $200 and $2000. The cost for powder coating in Fort Lauderdale is between $40 and $600 per part.

If you need to ship the parts for powder coating in Fort Lauderdale to a specialized facility, you will need to disassemble and pay for shipping which is not included in the above-mentioned cost. This is highly dependent on fuel prices. There are many objects that need dis-assembly and re-assembly. So you could make it into a DIY project or hire the services of a furniture assembler.

The per square foot powder coating cost is Fort Lauderdale will cost between $1 and $5 dollars or between $0.072 and $0.40 per square inch. The other factors that affect commercial applications are the type of substrate being used. For instance, whether you are using steel, aluminum or cast materials like iron. Powder coating cost in Fort Lauderdale also depends upon the preparation time, the number of components and component size is important too. For example you can expect to pay between $40 and $250 for patio furniture pieces or between $2 to $5 dollars per square foot for a new aluminum or steel powder coated fences.

How to Maintain Powder Coating

There are different elements that can affect the life of powder coating like pollution, salt water, sun, rain and wind. But with the right type of maintenance and care you can help combat the negative effects on powder coating in Fort Lauderdale when it is exposed to the weather.

Powder coating in Fort Lauderdale is not maintenance-free and over time it loses all or some of its protective and decorator properties. It is not possible to predict the rate at which powder coating in Fort Lauderdale will lose its decorative or protected value or how long it will last.

But with regular cleaning and maintenance with the right kind of cleaning tools and following a routine you can double and even triple the powder coating life service in Fort Lauderdale.

Use pressure washing- You can use pressure washing to clean powder coated surfaces in Fort Lauderdale. It is effective in removing grime and dirt and is usually used for cleaning commercial patio furniture, outlook surfaces or bus shelters. You should also use a low pressure setting and filtered water. Do not use tap water or ground water as ground water can leave stains on powder coated surfaces.
Use only a mild soap and water - Always use a soft brush or a cloth to clean powder coated surfaces in Fort Lauderdale with a solution of mild soap and water. The best soap is one that uses emulsifiers and that can break down common stains. Powder coated surfaces that are exposed should be cleaned very regularly either weekly or bi-weekly. You can also wipe them down or rinse with filtered water.

Equipment Powder Coating Fort Lauderdale

Do not use commercial cleaning solutions or detergent- Though commercial cleaning solutions and detergents are an effective way to remove grime and dirt, these are not a good choice. They should not be used on powder coated surfaces in Fort Lauderdale because they will remove layers of the finish from the surface. As a result, over time your powder coated surfaces will be compromised and may even crack, especially if it is exposed to harsh with conditions.
Use wax – Wax can be used to protect the exposed surfaces like fences, handrails, patio furniture and stairways. They can be waxed with a light coating of non-abrasive high-grade car wax. You can choose a brand that has UV blockers or inhibitors but do not use compound wax as this contains abrasives that can harm your powder coating in Fort Lauderdale.

Advantages of Powder Coating

Powder coating in Fort Lauderdale has several different advantages and some of the main ones are listed below:

Very durable- Powder coating in Fort Lauderdale is one of the most long lasting and color durable finishes that can be given to almost any type of metal. It is used by businesses, consumers and large industries. Powder coated surfaces in Fort Lauderdale is very resistant to scratching, chipping, feeding, and other wear and tear. There are plenty of different vibrant colors available and it serves as a decorative as well as functional finish.
Less processing time- The processing time for powder coating in Fort Lauderdale is much less than wet paint because there is no solvent and no flash off period. Once an article is powder coated it can be put directly in the oven for curing and this saves a lot of time and space.
Minimized health hazard to the operators- Since powder coating does not contain any solvent; there is a great reduction in throat, mouth and nose irritation. With liquid paint, the operator’s skin needs to be washed off using solvent and they also need to use soap in hot water as an emulsifier. With powder coating in Fort Lauderdale most people do not get affected with skin irritation and the powder is easily removed just by washing with warm water.

Furniture Powder Coating Fort Lauderdale

Environmentally friendly- Powder coating in Fort Lauderdale does not contain VOCs (Volatile Organic Compounds). VOCs are pollutants to the environment and when it comes to powder coating in Fort Lauderdale, finishing companies do not need to buy equipment to help control environmental pollution like in the case of liquid paints.
It is cleaner to use - Powder coating is much easier to apply compared to wet paint. Spillages of powder outside the spray booth can easily be removed with a vacuum cleaner which has a dust tight motor or is air driven.
There is more cost savings- In powder spray booths, air extraction is much less compared to solvent-based paints. As a result, lesser amount of warm air needs to be replaced in workshops and less dust is attracted. There is also less air draft when the operators work.

What Is the Best Ceramic Coating for Cars

There are different types of ceramic coatings which are available today and all of these come at different price ranges. For instance ceramic coatings can cost as low as $40 and it can even go over $100. Ceramic coatings that cost under $40 have little durability and are slightly above average quality but it will not last you for more than a year

Coatings that cost between $50 and $100 will offer you a professional finish and durability will not be an issue. Coating at this price range can last you up to five years. If you are willing to spend over $100 for ceramic coating, then it will last you the lifetime of your car but for most people this is a quite a high cost. Some of the top brands for ceramic coatings are Ethos, which is for US based brand. They focus on locally made ingredients and offer high-quality products.

Carpro is another brand that deals in coating products and car detailing. This company uses nanotechnology and has state-of-the-art products. Nasiol is another company which was established in Turkey and this company also uses nanotechnology for their coating products.

Types of Ceramic Coating for Cars

There are different types of ceramic coatings for cars. These are as follows:

Polymer coatings

Polymer or more commonly known as epoxy coatings are a popular type of ceramic coatings. This coating bonds with the layer of paint that is present on the substrate.

This bond is permanent as the paint and the coating becomes one. This type of coating results in a tougher and more resistant finish and the only way that polymer coating can be removed is by polishing.

Quartz

Quartz coatings are designed to be harder than other types. Silicon dioxide or quartz coatings have a very high level of hardness and the main aim is to protect the vehicle from debris and scratches.

It protects the shiny and fresh appearance of the substrate and the work piece looks good even after many years.

Hybrid

Hybrid coatings are basically a combination of polymer and quartz and this coating has the best of both worlds. It is supposed to be harder and creates a protective shell on the substrate.

But there is no proper evidence to show that this coating offers more protection than the other types of ceramic coatings.

What Do Ceramic Coatings Not Do?

Ceramic coatings have plenty of benefits but before you opt for it, you should keep in mind what you cannot expect from ceramic coatings. Ceramic coating will not make the product maintenance-free. It will simply make the maintenance much easier.

Though ceramic coatings are resistant to some amount of abrasion, they are not completely scratch-proof. They are resistant to minor scratches but will not be able to withstand major ones.

You will still need to wash and clean your car but once you use the ceramic coating you will cut down the amount of time that you spend in cleaning your car.
Ceramic coatings are relatively easy to apply but you will still need to wash and clean the substrate before the coating is applied. An example is the application of ceramic coatings on cars.

Contact Us

Our company deals with powder coatings in Fort Lauderdale. We also specialize in ceramic coatings and sandblasting among other types of finishes. If you want to find out additional details about these types of finishes, contact us and we will be in touch with you.

Call (954) 231-1287